Advertisement
Device Settings of the CP960
Swipe down from the top of the screen to enter the device setting screen.
Time and Date
Display notifications
Configuring Your Phone
Configuring via web user interface
Accessing the web user interface:
1. Swipe down from the top of the screen to enter the device setting screen.
2. Tap Status to obtain the IP address of the phone.
3. Open a web browser on your computer, enter the IP address into the address bar (for example.,
"http://192.168.0.10" or "192.168.0.10").
4. Enter the user name (default: admin) and password (default: admin) in the login page and then click
Login.
Network Settings:
You can configure the network settings in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid
network settings, for example, IP address, subnet mask, gateway address and DNS address.
Static IP: If the phone cannot contact a DHCP server for any reason, you need to configure IP address,
subnet mask, gateway address, primary DNS address and secondary DNS address for the phone
manually.
Note: The IP phone also supports IPv6, but IPv6 is disabled by default.
The wrong network settings may result in inaccessibility to your phone and may have an impact on the network
performance. Contact your system administrator for more information.
Customizing Time&Date:
Click Network->Basic->IPv4 Config.
Click Settings->Time&Date.
Wireless Mic icon and the number of
the connected wireless microphones
Tap the icon to turn the function on
or enter the corresponding function screen
Swipe left or right to delete a notification
Tap to clear all notifications
6
Advertisement
