Importing The Whiteboard Source File Via Wpp20; Importing An Existing Whiteboard During A Call Via Wpp20; Configuring Camera Settings; Controlling Local Cameras - Yealink MeetingEye 600 User Manual

Importing the Whiteboard Source File via WPP20

If you want to continue discussing the saved whiteboard file, download it from the cloud disk to your local
system and use WPP20 to import the whiteboard source files.
Procedure
1. At the note toolbar, tap
2. Select the whiteboard file locally and import it.

Importing an Existing Whiteboard during a Call via WPP20

If you have made notes on the whiteboard locally before the call, you can choose to import the whiteboard
to continue the discussion after the call.
Procedure
In the note toolbar, tap

Configuring Camera Settings

Controlling Local Cameras

•
Tracking Mode
•
Enabling/Disabling Privacy Protection
•
Allowing the Remote System to Control Your Camera
•
Controlling Local Cameras
If you do not enable the tracking mode feature, you can pan or tilt the camera and adjust the focal length
when you are in a call or on the idle screen.
About this task
If you do, the camera is adjusted automatically and you cannot control it.

Enabling Manual Camera Control When not in a Call

•
Enabling Manual Camera Control When in a Call
•
Adjusting Cameras When not in a Call
•
Adjusting Cameras When in a Call
•
Enabling Manual Camera Control When not in a Call
Procedure
1. On the idle screen, go to More > Camera Control.
2. Press OK Key to display more menus and select Tracking Mode.
3. Select Off.
> Import whiteboard.
> Import whiteboard before talking.
| Configuring Camera Settings | 35