Setting The Ctp20 Contact Display Label - Yealink MeetingEye 600 Administrator's Manual

Parameter
First Conference Call

Setting the CTP20 Contact Display Label

The contact interface displays all contact groups by default, including all Cloud contacts/YMS contacts (if
you log in to a YMS or Yealink Cloud accounts), local contacts, and LDAP contacts. If the contact is not
commonly used, you can choose to hide the contact list. You can also set the default contact tab based on
frequently used contacts so that when you select a contact, you can locate the corresponding contact list to
find the desired contact quickly.
Procedure
1. On your web user interface, go to Directory > Setting > Directory.
2. Configure and save the following settings:
Parameter
Enterprise
Device
VMR
Description
Configure the conference call
preferences.
• Auto
• Dial
• Directory
• History
• Start Conference
Default: Auto. If you have logged
in to a YMS or a Yealink cloud
account, the default value is Start
Conference. Otherwise, the
default value is Dial.
Description
Enable or disable to display the list of
Yealink Cloud /YMS contacts.
Note: It is enabled by default. It can be
configured only when logging in to a YMS
or Yealink Cloud account.
Enable or disable to display the devices
account list.
Note: It is enabled by default. It can be
configured only when logging in to a YMS
or Yealink Cloud account.
Enable or disable to display the VMR list.
Note: It is enabled by default. It can be
configured only when logging in to a YMS
or Yealink Cloud account.
| Configuring Call Settings | 211
Configuration Method
Web user interface
Configuration
Method
Web user interface
Web user interface
Web user interface