Yealink MeetingEye 600 Administrator's Manual page 193

•
On your CTP20, tap
2. Select Brightness Priority from the Exposure drop-down menu.
3. Configure and save the following settings:
Parameter
Brightness
Flicker
Wide Dynamic
Range
Photometry
> Setting > Basic > Camera > Exposure.
Description
Configure the value of brightness.
Note: the value is from 0 to 14. For
MeetingEye 400/VC880/VC800/VC500/
VC200/PVT980/PVT950, the default
value is 6; for MeetingEye 600, the default
value is 9.
Configure the value of camera flicker
frequency.
The supported types are as follows:
• 50 Hz
• 60 Hz
The indoor lights powered by a 50Hz
or 60Hz power source may produce a
flicker. You can adjust the camera flicker
frequency according to the power source
that the light is powered by.
Default: 50 Hz.
Off or Specify the WDR. The value
represents the compression degree of the
dynamic range
Cameras with WDR technology can work
perfectly both in the bright and the dark
conditions and present clear images that
balances different lighting, so that you can
identify the details.
Off-do not use WDR.
•
• 1~5
Note: For MeetingEye 600/VC880/
VC800/VC500/VC200/PVT980/PVT950,
the default value is 2; for MeetingEye 400,
the default value is off.
Configure the value of metering.
• Average
• Central
• Bottom
• Top
Default: Average.
| Configuring Camera Settings | 193
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20