Mute Indicator Led Of Cpe90 Wired Expansion Microphones; Led Instructions Of Cpw90-Bt Bluetooth Wireless Microphones - Yealink MeetingEye 600 Administrator's Manual

Mute Indicator LED of CPE90 Wired Expansion Microphones

LED Status
Solid red
Flashing red
Solid green
Off

LED Instructions of CPW90-BT Bluetooth Wireless Microphones

Battery Indicator LED
•
Mute Indicator LED
•
Battery Indicator LED
LED Status
Solid green for one
second and then off
Solid green for 3
seconds and then off
Solid green
Solid red
Fast flashing red 3
times and then off
Slowly flashing red
Off
Mute Indicator LED
LED Status
Slowly flashing
yellow
Fast flashing yellow
Solid red
Solid green
Slowly flashing red
Flashing red and
green alternately
Off
Description
The CP960 conference phone is muted.
The CP960 conference phone is ringing.
The CP960 conference phone is placing a call.
The CP960 conference phone is in a call and unmuted.
The CP960 conference phone is idle.
The CPE90 is disconnected to CP960 Conference Phone.
Description
The CPW90-BT is powered on.
The CPW90-BT is in the idle mode.
The CPW90-BT is fully charged.
The CPW90-BT is being charged.
The battery capacity is too low to turn on the CPW90-BT.
The battery capacity is less than 10%.
If you tap the mute button and the power indicator LED on the CPW90-BT is
still off, it means the CPW90-BT is powered off.
Description
The CPW90-BT is searching
The CPW90-BT is in the pairing mode.
The system is muted.
The system can pick voice.
The system is receiving an incoming call.
The VCS is searching for the CPW90-BT which has registered with it.
The CPW90-BT is in the idle mode.
| Getting Started | 41