Yealink MeetingEye 600 Administrator's Manual page 19

Front Panel of VC800 Codec
•
Rear Panel of VC800 Codec
•
Front Panel of VC800 Codec
The LED indicator in front of the camera indicates different camera status.
Related information
MeetingEye 600/MeetingEye 400/VC880/VC800/VC500/VC200/PVT980/ PVT950 LED Indicator
Rear Panel of VC800 Codec
Port Name
1 Line Out
2 Line In
3 USB
4 VC Hub/Phone
5 HDMI
6 Internet
7 DC48V
8 Reset Key
9 Security Slot
Description
Connect to an audio output device via an audio cable (3.5mm).
Connect to an audio input device via an audio cable (3.5mm).
• Connect to a USB flash drive.
Insert a USB flash drive for storing screenshots, recording videos
or capturing packets. If you insert multiple USB flash drives to the
VCS endpoint simultaneously, only the last USB flash drives you
insert can be identified by the endpoint.
• Insert a WF50 Wi-Fi USB Dongle for connecting to Wi-Fi or
providing wireless AP.
• Insert a BT42 Bluetooth USB Dongle for connecting to the
CPW90-BT Bluetooth wireless microphones.
• Insert a PSTN box CPN10 for connecting to the PSTN (Public
Switched Telephone Network).
• If you want to use wired sharing to present, connect this port to
the Codec port on the VCH50 video conferencing hub/to the PoE
port on the VCH51 video conferencing hub.
• Connect to CTP20.
• If you need an audio device, connect this port to the Internet port
on the CP960 Conference phone.
• Connect to VCM34.
Connect to a monitor for displaying video images.
Connect to the network device.
Connect to the power source via a power adapter.
Reset the VCS endpoint to factory defaults.
Allow you to connect a universal security cable to the VCS endpoint,
so you can lock the VCS endpoint down. The VCS endpoint cannot
be removed when locked.
| Getting Started | 19