Dhcp Options; Supported Dhcp Option Of Ipv4 - Yealink MeetingEye 600 Administrator's Manual

Parameter
Secondary DNS/Sec.DNS
Related information
Configuring IPv4 or IPv6

DHCP Options

The DHCP information with labels carries with the corresponding network and other control information.
The information is called option. After connected to the network, the device will broadcast the DISCOVER
request which carries the DHCP options of the network information. The DHCP server will replay the
corresponding option after receiving the request.
Note:
For more information on DHCP options, refer to

Supported DHCP Option of IPv4

•
DHCP Option 42, Option 2
•
DHCP Option 12
•
Supported DHCP Option of IPv4
The following table lists the DHCP options supported by Yealink VCS in IPv4 network.
Parameter
Subnet Mask
Time Offset
Router
Time Server
Domain Name Server
Host Name
Domain Server
Network Time Protocol
Servers
Description
Configure the secondary
DNS server assigned to the
system.
If you change this parameter,
the system will reboot to
make the change take effect.
RFC 2131
or
DHCP Options
1
2
3
4
6
12
15
42
| Configuring Network Settings | 75
Configuration Method
Web user interface
Endpoint
CTP20
RFC 2132.
Description
Specify the subnet mask of the
client.
Specify the offset between
the client subnet and the
Coordinated Universal Time
(UTC).
Specify a list of IP addresses
for routers on the client's
subnet.
Specify a list of time servers
available to the client.
Specify a list of domain name
servers available to the client.
Specify the name of the client.
Specify the domain name
that client should use when
resolving hostnames via DNS.
Specify the list of NTP server
address available to the client.