Configuring Additional Audio Call - Yealink MeetingEye 600 Administrator's Manual

Parameter
External
Local
Conference Contacts
LDAP
Tab Default

Configuring Additional Audio Call

If you enable this feature, when the number of video calls reaches the limit (except for 24-way video calls)
in the call, additional 5 users can still place audio calls to join the call. Otherwise, additional 5 users cannot
place audio calls to join the call. This feature is disabled by default.
About this task
For example, for VC800 with 16-way license, if you disable additional audio call, when you create a call,
only 16 participants can place video calls to join your call, the 17th participant cannot join the call.
Procedure
1. On your web user interface, go to Setting > Call Features.
2. Configure and save the following settings:
Parameter
Additional Audio Call
Description
Enable or disable to display the external
contact list.
Note: It is enabled by default. It can be
configured only when logging in to a YMS
or Yealink Cloud account.
Enable or disable to display the local
contact list.
Default: On.
Enable or disable to display the
conference contact list.
Default: On.
Enable or disable to display the LDAP list.
Note: It is enabled by default.
Configure the list of contacts that is
displayed by default when you enter the
contact interface.
Note: If you have logged in to a YMS or a
Yealink Cloud account, the default value
is Enterprise. Otherwise, the default
value is Local.
Description
Enable or disable the
additional audio call.
Default: Disabled.
| Configuring Call Settings | 212
Configuration
Method
Web user interface
Web user interface
Web user interface
Web user interface
Web user interface
Configuration Method
Web user interface