Configuring Content Sharing; Configuring Dual-Stream Protocol - Yealink MeetingEye 600 Administrator's Manual

Parameter
Background Transparency
Note: The site name is not displayed in the following cases:
• PVT980/PVT950/VC880/VC800/VC500 uses the H265 video codec to establish a call
VC200 uses the H263 protocol to establish a call
• PVT980/VC880/VC800 uses built-in MCU to establish a local conference
Tip: In a cloud/YMS conference call, the site name set by Yealink Meeting Management
Platform/Yealink Meeting Server is displayed in the top-left corner by default. To avoid name
superposition, you can disable this feature on the Yealink Meeting Management Platform/Yealink
Meeting Server or the endpoint.
Related tasks
Configuring the Site Name

Configuring Content Sharing

Content sharing is to send a secondary stream through a dual-stream protocol or a mix sending method,
so that the remote party can share your local content presentation. If the far site does not support the dual-
stream protocol, you can select the Mix Sending feature to mix the video and content, and then send them
to the far site in one stream.
By default, the PC presentation is enabled on the system when the content is sharing. If you do not want
the system to automatically start a PC presentation, you can disable it. You can configure the mode, the
frame rate and the resolution for the shared content.
For more information, refer to

Configuring Dual-Stream Protocol

•
Configuring Mix-Sending
•
Configure Content Sharing
•
Configuring Dual-Stream Protocol
The dual-stream protocol allows the video and PC content to be transmitted to the far site simultaneously,
thus meeting the requirements of different conference scenarios, such as training or medical consultation.
Based on this protocol, the participants can share contents while having a video call.
The Yealink video conferencing system supports the standard H.239 protocol and BFCP (Binary Floor
Control Protocol). The Yealink Cloud account and YMS account support dual-stream protocol by default. If
you want to share contents during the call using the SIP protocol and H.323 protocol, you need to enable
the H.239 protocol and BFCP in advance.
Description
Configure the text
background transparency
of the local site name to be
displayed on the screens of
the remote parties during a
call.
• Opaque
• Semitransparent
• Transparent
Default:
Yealink Meeting Server User
Configuration Method
Web user interface
Guide.
| Configuring Content Sharing | 177