Showing The Site Name To Remote Parties - Yealink MeetingEye 600 Administrator's Manual

2. Configure and save the following settings:
Parameter
Experimental
Access
Auto Framing

Showing the Site Name to Remote Parties

Showing the local site name to the remote parties allows remote parties to better identify the site when
making multi-way video calls. You can also customize the site name position, the text size, the color, and
set the background color and background transparency of the text. It is not applicable to MeetingEye 600/
MeetingEye 400/VP59.
Procedure
1. On your web user interface, go to Setting > Video & Audio > Show Site Name.
2. Configure and save the following settings:
Parameter
Show Site Name
Description
It is configurable only after the
experimental access is enabled.
Note: the default value is Off. It
takes 5 consecutive confirmations
to activate the experimental access
feature.
After enabled, the VC200 can
automatically adjust the camera
according to the number of
participants and position changes, and
output all participants' screens. The
panorama is output when no person
is detected in the initial state or in the
camera angle.
Note: the default value is Off.
It is configurable only when the
experimental access feature is
enabled.
Description
Configure whether to show
the site name to the remote
parties during a call.
Default: Disabled.
| Configuring Video Settings | 175
Configuration Method
Web user interface
Web user interface
Configuration Method
Web user interface