Meeting Whitelist; Adding Meeting Whitelist - Yealink MeetingEye 600 Administrator's Manual

Parameter
Match Incoming Call
Call Match
LDAP Sorting Results
For more information about the string display method of the LDAP search filter, refer to
www.ietf.org/rfc/rfc2254.

Meeting Whitelist

You can add meeting whitelist. The users in the whitelist can join your conference call directly without
meeting password even if you have enabled the meeting password feature. Your system supports up to 100
whitelist records. This feature is not applicable to VP59.

Adding Meeting Whitelist

•
Deleting the Meeting Whitelist
•
Adding Meeting Whitelist
The users in the whitelist can call you without the password.
Procedure
1. On your web user interface, go to Directory > Meeting Whitelist.
2. Enter the desired number.
The value can be the IP address, the account number, or the domain name.
3. Click Add.
Note:
Users in the whitelist can join virtual meeting room 1 of conference moderator without a
password. If conference moderator hosts a VMR mode conference, users in the whitelist still
need password to join virtual meeting room 2.
Description
Enable or disable the system
to match caller numbers with
LDAP contacts. If the match
is successful, the system will
display the caller name when
receiving an incoming call.
Default: Disabled.
Enable or disable the system
to match outgoing call
numbers with LDAP contacts.
If the match is successful,
the system will display the
contact name when placing a
call.
Default: Disabled.
Enable or disable the system
to sort the search results
in alphabetical order or
numerical order.
Default: Disabled.
| Managing the Directory | 229
Configuration Method
Web user interface
Web user interface
Web user interface
http://