Viewing Camera Status - Yealink MeetingEye 600 Administrator's Manual

2. Configure and save the following settings:
Parameter
Camera
Status
Camera Name

Viewing Camera Status

About this task
This feature is not applicable to VP59.
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Camera > Camera Info.
•
On your VCS, go to More > Status > Camera.
•
For MeetingEye 600/MeetingEye 400, go to More > Setting > System Status > Camera.
•
On your CTP20, tap
2. You can view the following camera status:
Parameter
Camera Name
Model
IP
Firmware Version
Hardware Version
SPEC
MAC
Description
Configure the desired camera.
Enable or disable the selected camera.
Default: On.
It is not applicable to MeetingEye 600/
MeetingEye 400/VC200/VC500/PVT950.
Customize a name for the camera.
> Setting > System Status > Camera.
Description
Customize a name for the
camera.
The VCS codec model.
The IP address of the
selected camera.
The firmware version of the
selected camera.
The hardware version of the
selected camera.
The specification of the
selected camera.
The MAC address of the
selected camera.
| Configuring Camera Settings | 182
Configuration Method
Web user interface
Web user interface
Web user interface
Configuration Method
Web user interface
Endpoint
Web user interface
Web user interface
Web user interface
Web user interface
Endpoint
CTP20
Web user interface