Setting The Wireless Network; Connecting To The Wireless Network - Yealink MeetingEye 600 Administrator's Manual

Parameter
Static DNS
Primary DNS/Pri.DNS
Secondary DNS/Sec.DNS

Setting the Wireless Network

For VC880/VC800/VC500/PVT980/PVT950, you need to connect a WF50 Wi-Fi USB Dongle to the system
for connecting to the wireless network. You can connect the MeetingEye 600/MeetingEye 400/VC200/VP59
to a wireless network directly.

Connecting to the Wireless Network

•
Viewing the Wireless Network Status
•
Forgetting a Wi-Fi
•
Disabling the Wi-Fi Feature
•
Connecting to the Wireless Network
There are two ways to connect to the wireless network:
• Connecting to an Available Wireless Network
• Connecting to a Hidden Wireless Network
When the system connects to a wireless network, the Wi-Fi icon
Fi icon indicates the signal strength. The more arcs you see, the stronger the signal strength is.
Description
Enable or disable DNS
feature.
Default: Off.
If you change this parameter,
the system will reboot to
make the change take effect.
Configure the primary DNS
server assigned to the
system.
Note: In the DHCP
environment, it is configurable
when the static DNS feature
is enabled. If you change this
parameter, the system will
reboot to make the change
take effect.
Configure the secondary
DNS server assigned to the
system.
Note: In the DHCP
environment, it is configurable
when the static DNS feature
is enabled. If you change this
parameter, the system will
reboot to make the change
take effect.
will display on the status bar. The Wi-
| Configuring Network Settings | 67
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20