•
On your CTP20, tap
2. Use the navigation keys to adjust the camera angle.
3.
Click
(
) or
If you use VCR20 Remote Control, scroll up or down to adjust the focal length.
Adjusting the White Balance
To display high-quality video image, you can adjust camera white balance. This feature is not applicable to
VP59.
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Camera > White Balance.
•
•
On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Camera > White Balance.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera > White Balance.
For VC200, go to More > Setting > Video & Audio > White Balance Mode.
•
On your CTP20, tap
2. Configure and save the following settings:
Parameter
White Balance Mode
.
(
) to adjust the focal length.
> Setting > Basic > Camera > White Balance.
Description
Configure the white balance
mode of the camera.
Auto—Yealink
•
recommends that you
use this setting for most
situations. It calculates
the best white balance
setting based on lighting
conditions in the room.
InDoor
•
OutDoor
•
•
OnePush
•
ATW—automatically
adjust the white balance
according to the picture
took by the camera.
•
Manually/ Manual—
manually adjust the color
temperature.
Default: ATW.
| Configuring Camera Settings | 185
Configuration Method
Web user interface
Endpoint
CTP20