Configuring The Audio Settings; Adjusting The Volume; Key Tone; Enabling Silent Mode - Yealink VC880 User Manual

Configuring the Audio Settings

You can configure audio settings on the system.
•

Adjusting the Volume

Key Tone

•

Enabling Silent Mode

•
• Muting the Microphone
Adjusting the Volume
You can adjust the following volume:
• Ringer volume: adjust the ringer volume when the phone is idle or ringing.
• Talking volume: adjust the volume of speakerphone when the system is in a call.
• Key tone volume: adjust the key tone volume when pressing the key on the remote control; adjust the key tone
volume of CP960 when dialing.
• Media Volume: adjust the media volume when playing recorded videos.
Procedure
Do one of the following:
• On your remote control, press volume key to adjust the volume.
• On your CP960, tap volume key or drag the volume slider to adjust the volume.
• In the top-right corner of CTP20, drag the volume slider.
Note: You can still use CP960 to adjust the system volume even if it is not as the active audio device of
the system.
Key Tone
You can enable the key tone feature. When you press any key on the remote control or tap the onscreen dial pad on
CP960, the system will make a sound.
Configuring the Key Tone by the Remote control
•
Configuring the Key Tone by CTP20
•
Configuring the Key Tone by the Remote control
Procedure
1. On your remote control, go to More > Setting > Basic.
2. Select the Key Tone checkbox.
Configuring the Key Tone by CTP20
Procedure
1. On your CTP20, tap Setting > Basic.
2. Enable Key Tone.
Enabling Silent Mode
If you enable the silent mode, your system makes no sound.
Enabling Silent Mode by Remote Control
•
• Enabling Silent Mode by CP960
| Settings | 84