Yealink MeetingEye 600 Administrator's Manual page 102

For detailed introduction, refer to
Procedure
1. Do one of the following:
On your web user interface, go to Account > VC Platform.
•
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Advanced > Account > Video
Conference Platform.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Advanced > Video
Conference Platform.
For VP59, go to Setting > Advanced > Video Conference Platform.
•
On your CTP20, go to
2. Configure and save the following settings:
Parameter
Cloud account
Platform Type
ID
Password
Server Host/Server
Port
Yealink Full HD Video Conferencing System User
> Setting > Advanced > Account > Video Conference Platform.
Description
Enables the Cloud feature.
Note: if it is set to Off, your
device cannot log into YMS.
Select YMS.
Specify the ID when
registering this YMS account.
Note: the default value is
blank.
Specify the password when
registering this YMS account.
Note: the default value is
blank.
The IP address or the domain
name of Yealink meeting
server.
Note: the default value is
blank.
Select a port of Yealink
meeting server.
Note: the default port number
is 0.
| Configuring Account Settings | 102
Guide.
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface