Yealink MeetingEye 600 Administrator's Manual page 122

On your web user interface, go to Setting > Date&Time.
•
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > BasicBasic > Date & Time.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Basic > Date & Time .
For VP59, tap Setting > Basic > Date & Time.
•
CTP20 tap > Setting > Basic > General > Date & Time.
2. Configure and save the following settings:
Parameter
Daylight Saving Time
Fixed Type
Start Date
Description
Configure the type of DST.
The available types are as
below:
Disabled: do not use DST.
•
Enabled-use DST. You
•
can manually configure
the start time, the end time
and the offset according to
your needs.
• Automatic-use DST.
DST will be configured
automatically. You do
not need to manually
configure the start time,
the end time and the offset
according to your needs.
Default: Auto.
Specify the DST calculation
methods.
The available DST calculation
methods are as below:
• By Date- specifies the
month, day and hour to be
the DST start/end date.
By Week- specifies the
•
month, week, day and
hour the DST start/end
date.
Note: It only works when you
enable Daylight Saving Time.
When you select By Date as
the fixed type, configure the
start time of DST.
Note: It only works when you
enable Daylight Saving Time.
| Basic Settings | 122
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Web user interface