Configuring Dtmf For H.323 Protocol Transport - Yealink MeetingEye 600 Administrator's Manual

Parameter
DTMF Type
DTMF Info Type
DTMF Payload Type
(96~127)

Configuring DTMF for H.323 Protocol Transport

When using an H.323 account or logging into the StarLeaf third-party platform, you can set the DTMF
transmission method for the H.323 protocol.
Procedure
1. On your web user interface, go to Account > VC Platform > Platform Type > StarLeaf or Account >
H.323.
2. Configure and save the following settings:
Parameter
DTMF Type
Description
Configure the DTMF type.
• INBAND—DTMF is transmitted in
the voice band, together with the
general RTP voice packet.
RFC2833—DTMF digits are
•
transmitted by RTP packet which is
compliant to RFC2833.
SIP INFO—DTMF digits are
•
transmitted by SIP INFO.
RFC2833+ SIP INFO—DTMF
•
digits are transmitted by RFC 2833
and the SIP INFO.
Default: RFC2833.
Configure the DTMF info type when
DTMF type is set to SIP INFO or
RFC2833+SIP INFO.
• DTMF-Relay
• DTMF
• Telephone-Event
Default: DTMF-Relay.
Configure the value of DTMF payload.
Default: 101.
Description
Configure the DTMF type.
INBAND—DTMF is transmitted in the
•
voice band, together with the general
RTP voice packet.
• Auto—the system automatically
negotiates the way (INBAND, RFC2833
or SIP INFO) to transfer DTMF digits.
Default: Auto.
| Configuring the Audio Settings | 158
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Configuration Method
Web user interface
Endpoint
CTP20