Call Protocol - Yealink VC800 User Manual

https://arttel.ru/
User Guide for the VC800 Video Conferencing System

Call Protocol

Note
84
https://arttel.ru/shop/videokonferentsii/yealink-vc800-cp960-8way
Add number for the local contact.
5.
Tap to accept the change or
6.
Call history management feature is configurable via web user interface at the path
Directory->History.
The VC800 video conferencing system supports SIP and H.323 call protocols. H.323 is commonly
used to communicate to other video conferencing systems. SIP is commonly used to
communicate with other VoIP devices. You can configure which protocol is to be used when the
system is making calls. When the Auto call protocol is used, the system preferentially uses the
H.323 protocol to place calls. If there is no available H.323 account on the system, the system
will switch to the SIP protocol. You can also specify the desired protocol for the system to place
calls via the remote control or web user interface.
Before configuring call protocol, ensure the remote system supports the call protocol too. For
more information, contact your system administrator.
To configure the call protocol via the remote control:
Select (More menu).
1.
Press or to scroll to Setting and then press
2.
Press or to scroll to Call Features and then press
3.
Press or to scroll to Call Protocol and then press
4.
Select desired type or Auto from the pull-down list of Call Protocol.
5.
Press or to select Save and then press
6.
to cancel.
to expand the menu.
to enter submenu.
.
to accept the change.