Configure Content Sharing - Yealink MeetingEye 600 Administrator's Manual

Parameter
Mix
Note: If the call parties enable the dual-stream protocol, the dual-stream protocol will be used to
send multiple video streams.

Configure Content Sharing

You can configure whether to enable PC presentation on the system when the content is sharing. You can
also specify the mode, the maximum frame and the resolution for the shared content. Make sure that the
definition of the presentation is good. You can not configure the content sharing mode for VP59, but you
can configure frame and resolution for VP59.
Procedure
1. On your web user interface, go to Setting > Video & Audio > Content Sharing.
2. Configure and save the following settings:
Parameter
Enable 4K
(it is only applicable to
MeetingEye 600/MeetingEye
400)
Enable 60fps
(it is only applicable to
MeetingEye 600/MeetingEye
400)
Description
Enable or disable the mix-
sending feature on the
system.
Note: the default value is On.
Description
Enable or disable 4K for
content sharing.
Default: Disabled.
Enable or disable 60fps for
content sharing.
Default: Disabled.
| Configuring Content Sharing | 179
Configuration Method
Web user interface
Configuration Method
Web user interface
Web user interface