Configuring Hide Local Video When Pip; Configuring Multi-Camera Default Layout - Yealink MeetingEye 600 Administrator's Manual

Parameter
Equal Display Local

Configuring Hide Local Video When PIP

In the PIP (Picture-in-Picture) mode, the local video image is always shown at the bottom corner of the
screen. If you enable hide local video when PIP, the local video image is automatically hidden within 5
minutes if there is no operation from the remote control/CTP20/CP960. This feature is not applicable to
VP59.
About this task
PIP mode only takes effect on the local layout. In a two-way video call, the video of one end is displayed in
a large window, and the video of the other end is reduced to a thumbnail in the bottom-right corner of the
large window. In the YMS/Cloud conference, the large window displays the conference layout and the small
window displays the local video.
Procedure
1. On your web user interface, go to Setting > Call Features > Layout.
For MeetingEye 600/MeetingEye 400, go to Setting > Display > Layout.
2. Configure and save the following settings:
Parameter
Hide Local Video When PIP

Configuring Multi-Camera Default Layout

During a call, if you connect VCC22, all the local video streams are synthesized to one video stream,
and sent to the far site. You can configure the default layout when you connect multiple cameras and set
the camera you want to highlight. It is not applicable to MeetingEye 600/MeetingEye 400/VC200/VC500/
PVT950.
Procedure
1. On your web user interface, go to Setting > Camera > Camera.
2. Configure and save the following settings:
Description
Select Off to hide local video
image when the video layout
is equal.
• On—the local video image
is shown.
• Off—the local video image
is hidden.
Default: On.
Description
Enable or disable the local
video image to hide in the PIP
(Picture-in-Picture).
On—the local video image
•
is hidden in the PIP.
Off—the local video image
•
is shown in the PIP.
Default: Disabled.
| Configuring Video Settings | 164
Configuration Method
Web user interface
Configuration Method
Web user interface