Muting Auto-Dialed Calls; Dnd (Do Not Disturb); Enabling Dnd When Not In A Call - Yealink MeetingEye 600 Administrator's Manual

On your web user interface, go to Setting > Call Features.
•
• On your VCS,
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Call Feature.
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Call Features.
•
On your CTP20, tap
2. Enable or disable Auto Answer Mute.
3. Save the change.
Related information
Auto Answer

Muting Auto-Dialed Calls

The Auto Dialout Mute feature allows the system to turn off the microphone after the other party answers
your call , so that the other party cannot hear you.
About this task
Note: The system is still muted after you hang up.
Procedure
1. On your web user interface, go to Setting > Call Features.
2. Enable or disable Auto Dialout Mute.
3. Save the change.

DND (Do Not Disturb)

You can enable do not disturb feature to reject incoming calls automatically. All calls you reject will be
logged to Missed Calls list.

Enabling DND When Not in a Call

•
Enabling DND during an Active Call
•
Enabling DND When Not in a Call
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Call Features.
•
• On your VCS, go to More > Setting > Call Features.
For MeetingEye 600/MeetingEye 400, go to More.
For VP59, tap
• On your CP960 conference phone, swipe down from the top of the screen to enter the control center.
•
On your CTP20, tap
2. Enable/ disable DND.
3. Save the change.
> Setting > Basic > Call Features.
> DND.
.
| Configuring Call Settings | 219