Finding The Registered Cpw90-Bt; Using Ctp20; Wired Connection To Ctp20; Wireless Connection To Ctp20 - Yealink MeetingEye 600 Administrator's Manual

• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Audio > Wireless
Microphone.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Video & Audio >
Wireless Microphone and select the desired wireless microphone.
•
On your remote control, go to
the desired wireless microphone.
2. Select a desired microphone to view the information.

Finding the Registered CPW90-BT

Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Wireless Microphone.
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Audio > Wireless
Microphone.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Video & Audio >
Wireless Microphone.
•
On your CTP20, tap
Microphone.
2. Select a wireless microphone and then select Find.
The mute indicator LED on the CPW90-BT flashes red and green alternately.

Using CTP20

CTP20 supports wired and wireless connections. MeetingEye 600/MeetingEye 400/PVT980/PVT950/
VC880/VC800/VC500 can connect up to 4 CTP20s and the VC200 can connect only one CTP20. VP59
cannot be used with a CTP20.

Wired Connection to CTP20

•

Wireless Connection to CTP20

•
Using Multiple CTP20s for Collaboration
•
Wired Connection to CTP20
After connected to the VC Hub/Phone port via the network cable, CTP20 will be connected to the VCS
endpoint automatically. For more information about the connection between CTP20 and VCS endpoints,
Yealink CTP20 Quick Start
refer to
Wireless Connection to CTP20
If the VC Hub/Phone port of the VCS endpoint is occupied, you can connect CTP20 to the PoE switch for
power supply and to the wireless AP provided by the VCS endpoint.
Before you begin
Make sure you enable Wireless AP on VCS endpoints. For VC880/VC800/VC500/PVT980/PVT950, you
also need to connect WF50 to them.
> Setting > Basic > Audio > Wireless Microphone, and select
> Setting > Basic > Audio > Wireless Microphone > Add Wireless
Guide.
| Accessories with Your System | 253