Adjusting The Monitor Display Proportion - Yealink MeetingEye 600 Administrator's Manual

Parameter
Default Output in Call
Related tasks
Configuring Preset Synchronize With Active Camera

Adjusting the Monitor Display Proportion

If you use the TV as the display device, the TV might not display the entire video image. To solve this
problem, you can adjust the display proportion to display the entire video image as you need. This feature
is not applicable to VP59.
Procedure
1. Do one of the following:
• On your VCS, go to More > Setting > Basic > Display.
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Display.
• On your CTP20, tap Setting > Basic > Display.
2. Adjust the monitor display.
3. Save the change.
Description
Specify the content to be displayed
on the secondary monitor during a
call.
• Auto—The secondary monitor
displays the content in this
priority: PC> Local camera.
PC—The secondary monitor
•
displays the PC content.
Local—The secondary monitor
•
displays the video images from
the local camera.
Note: the default value is Auto.
After you specify "Output for
Display 2", you can still modify
the content to be displayed on the
secondary monitor temporarily
during a call via CTP20 or remote
control. But the next time you
establish a call, the content to
be displayed on the secondary
monitor is controlled by the "Output
For Display 2" .
| Configuring Video Settings | 171
Configuration Method