Adjusting The Multi-Camera Layout During A Call; Using The Cpw90-Bt Bluetooth Wireless Microphones With Vcs - Yealink MeetingEye 600 Administrator's Manual

On your CP960 conference phone, tap Camera > The current control camera.
•
•
On your CTP20, tap
2. Select the desired camera and then adjust the angle and the focus.

Adjusting the Multi-Camera Layout During a Call

During a call, all video streams captured from the connected cameras are synthesized to one video stream,
and then sent to the far site. You can change the camera layout during a call.
Procedure
1. Do one of the following when the system is during a call:
• On your web user interface, go to Home > Camera Layout.
On your remote control, press the OK key to open Talk Menu and go to Layout Adjustment >
•
Camera Layout.
• On your CP960 conference phone, go to Camera > Layout.
•
On your CTP20, tap
2. Configure and save the following settings:
Parameter
Camera Layout
3. If you select 1+N or Selected Speaker as the camera layout, you should choose a camera you want to
focus on.

Using the CPW90-BT Bluetooth Wireless Microphones with VCS

CPW90-BT Bluetooth wireless microphones can work as the audio input devices of your video
conferencing system. You can connect up to 2 CPW90-BT Bluetooth wireless microphones to the video
conferencing system. For more information, refer to
Guide.
CPW90-BT Bluetooth Wireless Microphones is not applicable to VP59.
Registering CPW90-BT with VCS
•
Deregistering CPW90 from VCS
•
Viewing the Information of Bluetooth Wireless Microphones
•
Finding the Registered CPW90-BT
•
.
> Multi-camera Layout Switching.
Description
Configure the camera layout
during a video call.
• 1+N: the selected camera
is given prominence in the
largest pane, and other
cameras are displayed in
small panes.
Selected Speaker:
•
the selected camera
is displayed in the full
screen.
Equal N×N: every camera
•
is given equal prominence
in equal-sized panes.
Default: 1+N.
CPW90-BT Bluetooth Wireless Microphones Quick Start
| Accessories with Your System | 251
Configuration Method
Web user interface
Endpoint
CP960 Conference Phone
CTP20