Setting The Endpoint As A Regular Mode Conference Room - Yealink MeetingEye 600 Administrator's Manual

Meeting Room
Type
Regular Mode
VMR Mode
You can also configure the third-party virtual meeting room to make multi-party video calls.
Note:
If you log into the Yealink VC Cloud Management Service, the conference may be managed via the
Yealink VC Cloud Management Service only, you cannot configure it on your system.

Setting the Endpoint as a Regular Mode Conference Room

•
Setting the Endpoint as VMR Mode Conference Rooms
•
Joining the VMR
•
Configuring the Third-party Virtual Meeting Room
•
Related concepts
Multipoint Licenses
Setting the Endpoint as a Regular Mode Conference Room
For regular mode conference, virtual meeting room 1 is available. You can configure the password for
virtual meeting room 1 to prevent unauthorized participants from joining the virtual conference room.
Procedure
1. On your web user interface, go to Setting > Built-in MCU Setting > Conference Setting.
2. Select Regular Mode from the Conference Type drop-down menu.
3. If you need to configure a conference room password for virtual conference room 1, configure and save
the following settings:
Supported Model
MeetingEye 600/MeetingEye
400/VC880/VC800/VC500/C200/
PVT980/PVT950
VC800/VC880/PVT980 with a
multipoint license
| Configuring Virtual Meeting Room | 203
Difference Multipoint Allocation
Virtual meeting Up to 1 video call and
room 1: when 5 voice calls.
participants
call the virtual
meeting room 1,
the moderator also
joins the meeting.
Virtual meeting The total MCU ways of
room 1: when the two virtual meeting
participants rooms are depended
call the virtual on the multipoint
meeting room 1, license you imported.
the moderator also You can allocate the
joins the meeting. MCU ways between
two virtual meeting
Virtual meeting
rooms respectively.
room 2: when
participants call
the virtual meeting
room 2, only
participants join
the meeting,
the moderator
does not join the
meeting.