Parameter
Syslog Level
Syslog Facility
Syslog Prepend Mac
Note:
The severity level of the exported Module Log will not be greater than the Syslog Level. For
example, if you set Syslog Level as 3 and set Talk log Level as 6, the exported Talk log Level will
still be 3. If you set Local Log Level as 5 and set Talk log Level as 4, the exported Talk log Level
will be 4.
Capturing Packets
You can capture packets in three ways: capturing the packets via web user interface, on the remote control
or using the Ethernet software. You can analyze the packet captured for troubleshooting.
Capturing the Packets via Web User Interface
•
Capturing the Packets via Remote Control
•
Capturing the Packets via Ethernet Software
•
Capturing the Packets via Web User Interface
You can capture the packets via the web user interface. You can also download the captured packets to
your computer. The video conferencing system supports the following two modes for capturing packets:
Enhanced: directly exporting the packets file to local PC while capturing.
•
Normal: manually exporting the packets file to local PC after stopping capturing.
•
Capturing the Packets in Enhanced Way
•
Description
Specify the level of syslog
information that displayed in
the syslog.
0-system is unusable
1-action must be taken
immediately
2-critical condition
3-error conditions
4-warning conditions
5-normal but significant
condition
6-informational
Note: the default value is 6.
Higher value indicates more
detailed content.
Configure the facility that
generates the log messages.
Default: Local Use 0.
Enable or disable syslog
prepend Mac.
Default: Disabled.
| System Maintenance | 261
Configuration Method
Web user interface
Web user interface
Web user interface