Viewing The Connected Devices; Adding Connected Devices To The Blacklist - Yealink MeetingEye 600 Administrator's Manual

Parameter
AP IP Address
IP Address

Viewing the Connected Devices

Procedure
1. Do one of the following:
• On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Network > Wi-Fi > Wireless AP > AP
Device List.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wireless AP >
AP Device List.
For VC200, go to More > Network > Wireless AP > AP device list.
For VP59, tap Setting > Network & ConnectionWireless APAP device list.
•
On your CTP20, tap
Device List.
2. View the names and the MAC addresses of the connected devices.

Adding Connected Devices to the Blacklist

You can add connected devices to the blacklist, and the device is disconnected from the wireless AP.
Procedure
1. Do one of the following:
• On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Network > Wi-Fi > Wireless AP > AP
Device List.
Description
Configure the generation type
of wireless AP address.
Auto—generates the
•
wireless AP address
automatically. The default
network segment is
192.168.144.X.
• Manual—If automatically
generated network
segment conflicts with
the one you use, you
can change the network
segment manually.
Default: Auto.
Configure the IP address of
the wireless AP.
Only when the AP IP Address
is manual do you need to
configure this parameter.
> Setting > Network > Host Network > Network > Wireless AP > AP
| Configuring Network Settings | 72
Configuration Method
Web user interface
Web user interface