Yealink MeetingEye 600 Administrator's Manual page 28

No. Name
2 Video Recording Key Start or stop recording the video and audio.
3 Layout Key
4 Custom Key
5 Volume up key
6 Volume down key
7 Zoom in key
8 Zoom out key
9 OK key
10 Navigation Key
11 Mute Key
12 Home key
13 Back key
14 Off-hook Key
15 Delete Key
16 On-hook Key
17 Keypad
18 Character Key
19 Pound key
Related information
Using the Remote Control
Description
Adjust the layout during a video call.
Customize the key function.
You can configure this key as the Presentation key (default), the
Input key, the ScreenShot key, Mute Speaker key, or Preset key.
Increase the speaker volume.
Turn down the speaker volume.
• Increase the focal length of the camera.
• Zoom in the screenshot.
• Turn the page up.
• Decrease the focal length of the camera.
• Zoom out the screenshot.
• Turn the page down.
Go the sub-menu, confirm actions or answer incoming calls.
• Navigate through menu items.
• Pan and tilt the camera to adjust the viewing angle.
Mute or unmute the microphone
• Return to the idle screen when the system is not in a call.
• Open the Talk Menu during a call.
Return to the previous menu.
Enter the pre-dialing screen, the dialing screen or the
answering screen.
• Delete the text. Delete one character at a time. Long press
to delete all characters in the input field.
• One press to capture packets. When the device is connected
to the USB flash drive, long press it for 2 seconds to start
capturing packets and long press it for 2 seconds again to
stop capturing packets.
• End a call or exit a conference call.
• Return to the idle screen.
• Enter digits.
• Go to the pre-dialing screen.
Enter the special characters: .@*.
Enter the pound key (#).
| Getting Started | 28