Parameter
Outbound Proxy Server/
Outbound Server
Remember password
Transport
Server Expires
Description
The IP address or domain
name of the outbound proxy
server.
Note: the default value is
blank.
Enable or disable
remembering password.
Note: the default value is On.
If it is set to On, the password
will be filled in automatically
when you enter the username
next time.
Specify the transport protocol
for transmitting the SIP
signaling.
The supported protocols are
as follows:
UDP—it provides the
•
best transmission for SIP
signaling.
•
TCP—it provides a reliable
transmission for SIP
signaling.
TLS—it provides a safe
•
transmission for SIP
signaling. TLS is available
only when the device is
registered on a SIP server
that supports TLS.
DNS-NAPTR—the device
•
performs the DNS NAPTR
and SRV request to find
the service type and the
port if no server port is
given.
Default: TLS.
The registration timeout (in
seconds) of the device.
After the timeout, the device
will send the registration
request to the server again.
Default: 3600 seconds.
| Configuring Account Settings | 111
Configuration Method
Web user interface
Endpoint
CTP20
Endpoint
CTP20
Web user interface
Web user interface