Yealink MeetingEye 600 Administrator's Manual page 139

Parameter Description
Auto Recording
Enable or disable the system to start
recording automatically once a call is
established.
• On- the system starts recording
automatically once a call is
established.
Off- the system does not start
•
recording automatically once a call is
established.
Note: the default value is Off. Only the
Recording feature is enabled can this
feature be available.
Stop Recording
Enable or disable the system to stop
When Call
recording automatically once a call is
Established
established.
On- the system stops recording
•
automatically once a call is
established.
• Off- the system does not stop
recording automatically once a call is
established.
Default: Disabled. It is not applicable to
VP59.
Stop Recording
Enable or disable the system to stop
When Call
recording automatically once a call is
Ended
ended.
• On- the system stops recording
automatically once a call is ended.
• Off- the system does not stop
recording automatically once a call is
ended.
Default: On. It is not applicable to VP59.
Recording
Enable or disable the system to show
Notification
recording icon and recording prompt.
• On- the recording icon and the
duration are displayed on the system
screen.
Off- the recording icon and the
•
duration are not displayed on the
system screen.
Default: On.
| Basic Settings | 139
Configuration Method
Web user interface
Web user interface
Web user interface
Web user interface