Dhcp Option 42, Option 2; Dhcp Option 12 - Yealink MeetingEye 600 Administrator's Manual

Parameter
Vendor-Specific Information
Vendor Class Identifier
TFTP Server Name

DHCP Option 42, Option 2

Your system can obtain the NTP server address via DHCP.
DHCP option 42 is used to obtain the available NTP server list.
DHCP option 2 is used to specify the offset (seconds) between the system's subnet and Coordinated
Universal Time (UTC).
Related tasks
NTP Settings

DHCP Option 12

You can specify a hostname for the system. When the system sends the request of DHCP DISCOVER, it
will report the configured host name to the DHCP server via DHCP option 12. See
restrictions.
Configuring the Host Name
•
Configuring the Host Name
Procedure
1. On your web user interface, go to Network > LAN Configuration > Host Name.
2. Configure and save the following settings:
Parameter
Host Name
DHCP Options
43
60
66
Description
Configure the host name of the
system.
Note: When the system broadcasts
DHCP DISCOVER messages, it will
report the configured host name to
the DHCP server via DHCP option
12. For more information, contact
the network administrator.
If you change this parameter, the
system will reboot to make the
change take effect.
| Configuring Network Settings | 76
Description
Identify the vendor-specific
information.
Identify the vendor type.
Identify a TFTP server when
the 'sname' field in the DHCP
header has been used for
DHCP options.
RFC 1035
for character
Configuration Method
Web user interface