Removing Devices From The Blacklist; Disabling The Wireless Access Point - Yealink MeetingEye 600 Administrator's Manual

For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wireless AP >
AP Device List.
For VC200, go to More > Network > Wireless AP > AP device list.
For VP59, tap Setting > Network & Connection > Wireless AP > AP device list.
•
On your CTP20, tap
Device List.
2. Select the desired device.
The monitor prompts whether to move the device into blacklist.
3. Confirm the action.
The device is disconnected from your system, and cannot be connected to the wireless AP provided by
your system any more.

Removing Devices from the Blacklist

You can remove devices from the blacklist, so that the devices can connect to the wireless AP provided by
your system.
Procedure
1. Do one of the following:
• On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Network > Wi-Fi > Wireless AP >
Blacklist.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wireless AP >
Blacklist.
For VC200, go to More > Network > Wireless AP > Blacklist.
For VP59, tap Setting > Network & Connection > Wireless AP > Blacklist.
•
On your CTP20, tap
Blacklist.
2. Select the desired device.
The monitor prompts whether to move the device into blacklist.
3. Confirm the action.
After removed from the blacklist, the device can search and connect to the wireless AP provided by your
system.

Disabling the Wireless Access Point

Procedure
1. Do one of the following:
On your web user interface, go to Network > Wireless AP.
•
• On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Network > Wi-Fi > Wireless AP.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wireless AP.
For VC200, go to More > Network > Wireless AP.
> Setting > Network > Host Network > Network > Wireless AP > AP
> Setting > Network > Host Network > Network > Wireless AP >
| Configuring Network Settings | 73