Parameter
Exposure Compensation
Flicker
Gain Limit
Description
Configure the value of
exposure compensation.
The exposure compensation
is used to compensate the
camera effectively when
the camera is shooting in
a backlit environment. If
the environment light is
dark, you can increase the
compensation value.
Note: the valid value is -6 to
6. The default value is 0.
Configure the value of
camera flicker frequency.
The supported types are as
follows:
•
50 Hz
•
60 Hz
•
Off
The indoor lights powered by
a 50Hz or 60Hz power source
may produce a flicker. You
can adjust the camera flicker
frequency according to the
power source that the light is
powered by.
Default: 50 Hz.
Specify the value.
Note: the valid value is 1
to 15. For VC880/VC800/
VC500/VC200/PVT980/
PVT950, the default value
is 4; for MeetingEye 600/
MeetingEye 400, the default
value is 15.
| Configuring Camera Settings | 187
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20