Configuring Preset Synchronize With Active Camera; Allowing The Remote System To Control Your Camera - Yealink MeetingEye 600 Administrator's Manual

2. If there are multiple cameras connected, click the camera name area in the top-left corner and select
the desired camera from the drop-down menu.
3. Click any number to configure the camera presets.
You can add, modify, and delete the preset.
Note: For more information about configuring presets via CP960 conference phone, CTP20
or the remote control, refer to the
applicable to MeetingEye 600/MeetingEye 400/VP59.

Configuring Preset Synchronize With Active Camera

The preset synchronize with active camera feature is applicable to VC880/VC800/PVT980 connected to
the multi-camera VCC22 Be default, if multiple camera presets are set for the endpoint, after selecting
the preset, the corresponding camera adjusts to the preset position and is selected as the currently
active camera. If preset synchronize with active camera feature is disabled, after switching the preset, the
corresponding camera is adjusted to this preset position, but the current active camera is not switched, and
the active camera is still the camera selected by the current endpoint.
Procedure
1. On your web user interface, go to Setting > Camera > Other Settings.
2. Configure and save the following settings:
Parameter
Preset Synchronize With
Active Camera
Related tasks
Setting the Camera Presets

Allowing the Remote System to Control Your Camera

You can allow the far-end to control your camera, so that the far-end can meet their watching need.
Yealink Full HD Video Conferencing System User
Description
Enable or disable the Preset
Synchronize With Active
Camera.
Default: On.
| Configuring Camera Settings | 199
Guide. It is not
Configuration Method
Web user interface