Parameter
Flicker
Gain/Gain Limit
Wide Dynamic
Range
Photometry
Configuring the Mode of Brightness Priority
Procedure
1. Do one of the following:
•
On your web user interface, go to Setting > Camera > Exposure.
•
On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Camera > Exposure.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera > Exposure.
For VC200, go to More > Setting > Video & Audio > Exposure.
Description
Configure the value of camera flicker frequency.
Frequency:
•
50 Hz
•
60 Hz
The indoor lights powered by a 50Hz or 60Hz power
source may produce a flicker. You can adjust the
camera flicker frequency according to the power
source that the light is powered by.
Default: 50 Hz.
Specify the value.
Note: the valid value is 1 to 15. For MeetingEye 400/
VC880/VC800/VC500/VC200/PVT980/PVT950, the
default value is 6; for MeetingEye 600, the default
value is 6.
Off or Specify the WDR. The value represents the
compression degree of the dynamic range
Cameras with WDR technology can work perfectly
both in the bright and the dark conditions and present
clear images that balances different lighting, so that
you can identify the details.
•
Off-do not use WDR.
•
1~5
Default: 2.
Configure the value of metering.
•
Average
•
Central
•
Bottom
•
Top
Default: Average.
| Configuring Camera Settings | 192
Configuration
Method
Web user
interface
Endpoint
CTP20
Web user
interface
Endpoint
CTP20
Web user
interface
Endpoint
CTP20
Web user
interface
Endpoint
CTP20