Yealink MeetingEye 600 Administrator's Manual page 105

Parameter
Platform Type
Server/
Server Host
Transport
Server Expires
Keep Alive Interval
Description
Select Zoom.
The IP address or the domain
name of the Zoom server.
Default: zoomcrc.com
Specify the transport protocol
for transmitting the SIP
signaling.
The supported protocols are
as follows:
UDP—it provides the
•
best transmission for SIP
signaling.
TCP—it provides a reliable
•
transmission for SIP
signaling.
• TLS—it provides a safe
transmission for SIP
signaling. TLS is available
only when the device is
registered on a SIP server
that supports TLS.
DNS-NAPTR—the device
•
performs the DNS NAPTR
and SRV request to find
the service type and the
port if no server port is
given.
Default: TCP.
The registration timeout (in
seconds) of the device.
After the timeout, the device
will send the registration
request to the server again.
Default: 3600 seconds.
Configure the interval (in
seconds) that the device
sends keep-alive messages
to the SIP server, so that
the SIP server can remain
connected to the device.
Default: 30 seconds.
| Configuring Account Settings | 105
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Web user interface
Web user interface