Accessories With Your System; Using Wpp20 Wireless Presentation Pod; Using The Cpn10 Pstn Box; Using The Vcc22 Video Conferencing Cameras - Yealink MeetingEye 600 Administrator's Manual

Accessories with Your System

This section describes the how to use the accessories. For more information on other accessories, refer to
related guide.

Using WPP20 Wireless Presentation Pod

•

Using the CPN10 PSTN Box

•

Using the VCC22 Video Conferencing Cameras

•
Using the CPW90-BT Bluetooth Wireless Microphones with VCS
•
Using CTP20
•
Using VCM34
•
Using the Soundbar/MSpeaker II
•
Using WPP20 Wireless Presentation Pod
For VC880/VC800/VC500/PVT980/PVT950, you can pair with up to 5 WPP20s for content sharing at the
same time. However, for MeetingEye 600/MeetingEye 400/VC200/VP59, only 1 WPP20 can be supported.
For more information, refer to
Note: We do not recommend using WPP20 across walls, otherwise the signal energy may be
consumed.
Using the CPN10 PSTN Box
It is a cost-effective solution for PSTN office. Up to 2 cascaded PSTN Boxes can be installed to video
conferencing systems, which allow you to experience the conference conveniently in excellent speech
quality with PSTN. For more information, refer to
PSTN accounts can be registered on the system, with one-way audio call for one account. You can call
PSTN users, receive the call from PSTN users, or create a conference with the PSTN user.
Using the VCC22 Video Conferencing Cameras
You can connect up to 9 VCC22 video conferencing cameras to the VC880/PVT980 video conferencing
system. For VC800 video conferencing system, you can connect up to 8 VCC22 video conferencing
cameras. For more information, refer to
cameras are not applicable to MeetingEye 600/MeetingEye 400/VC500/VP59/VC200/ VC500/PVT950.

Controlling VCC22 Camera

•
Adjusting the Multi-Camera Layout During a Call
•
Controlling VCC22 Camera
When the VCS codec is idle, you can choose the desired camera to capture video images, and adjust the
camera angle and focal length.
Procedure
1. Do one of the following:
On your web user interface, go to Home > Camera Layout.
•
• On your remote control, press the right navigation key twice to go to the cameras list.
Yealink WPP20 Wireless Presentation Pod Quick Start
Yealink PSTN Box CPN10 Quick Start
Yealink VCC22 Camera Quick Start
| Accessories with Your System | 250
Guide.
Guide. Up to two
Guide. VCC22 video conferencing