Selecting A Call Protocol; Specifying The Video Call Rate - Yealink MeetingEye 600 Administrator's Manual

Selecting a Call Protocol

The system supports SIP and H.323 protocols for the incoming and the outgoing calls.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Call Features.
On your VCS, go to More > Setting > Call Features.
•
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Call Features.
For VP59, go to Setting > Call Setting.
2. Configure and save the following settings:
Parameter
Call Protocol/Call Type

Specifying the Video Call Rate

You can specify the maximum video call rate. The configurable video call rates on the system are: 64kb/s,
128kb/s, 256kb/s, 384kb/s, 512kb/s, 768kb/s, 1024kb/s, 1280kb/s, 1500kb/s, 2000kb/s, 3000kb/s, 4000kb/
s, 5000kb/s, 6000kb/s.
About this task
Note: The call rate of audio and PC content are also affected by this configuration.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Call Features.
On your VCS, go to More > Setting > Call Features.
•
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Call Features.
Description
Specify the desired call
protocol for placing calls.
The supported types are as
follows:
• Auto—the system
automatically uses the
available call protocol.
The system preferentially
uses the H.323 protocol to
place calls.
SIP—the system only
•
uses the SIP protocol for
placing calls.
H.323—the system only
•
uses H.323 protocol for
placing calls.
Default: Auto.
| Configuring Call Settings | 208
Configuration Method
Web user interface
Endpoint