Configuring Change Layout By Content Sharing - Yealink MeetingEye 600 Administrator's Manual

Parameter
HDMI 2

Configuring Change Layout by Content Sharing

The Change Layout by Content Sharing is enabled by default. During a call, when you are presenting
on the endpoint with a single screen connected to, the layout mode is changed into 1+N or voice
activated(except for VP59) mode automatically no matter what the current layout mode is, and the content
is enlarged and displayed on the screen. If the Change Layout by Content Sharing is disabled when you
are presenting during a call, the current mode is not changed in other modes, but the content is enlarged
and displayed on the screen. It is not applicable to MeetingEye 600/MeetingEye 400.
About this task
If the Change Layout by Content Sharing is disabled, the display layout when you are presenting during a
call is shown as below:
The current layout
Picture-in-picture:
Selected Speaker
Equal N×N
Procedure
1. On your web user interface, go to Setting > Call Features > Layout.
For VP59, go to Setting > Call Features.
2. Configure and save the following settings:
Description
Configure the default video layout for
HDMI 2 when a call is established.
Local—the local video image is
•
displayed in HDMI 2 when a call is
established.
• Remote Full screen—the remote
video image is displayed in HDMI 2
when a call is established.
While Content Sharing—after the
•
call is established with participant
sharing content, the content will be
displayed in HDMI2.
Note: when no participant shares
content, the local video image is
displayed in HDMI 2; when a participant
shares content, the content is displayed
in HDMI 2 by default.
Display layout after you are making a presentation
The display layout is changed into 1+N, and the content is
enlarged and displayed in the screen.
1+N
The display layout is still 1+N, but the content is enlarged
and displayed in the screen.
The display layout is still Selected Speaker, but the content is
displayed in full screen.
Every participant is given equal prominence in equal-sized
panes.
| Configuring Video Settings | 162
Configuration Method
Web user interface