Logging Into Videxio Platform - Yealink MeetingEye 600 Administrator's Manual

Parameter
Keep Alive Interval

Logging into Videxio Platform

You can log into Videxio platform and Videxio accounts will be automatically logged into the devices.
About this task
When you place a call using the Videxio account, you can:
• Dial Videxio accounts to establish a point-to-point call.
• Dial third-party accounts registered in the Videxio platform to establish a point-to-point call.
• Call into the Virtual Meeting Room to join the video conference with other devices.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > VC Platform.
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Advanced > Account > Video
Conference Platform.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Advanced > Video
Conference Platform.
For VP59, go to Setting > Advanced > Video Conference Platform.
•
On your CTP20, go to
2. Configure and save the following settings:
Parameter
Cloud account
Platform Type
Description
Configure the interval (in
seconds) that the device
sends keep-alive messages
to the SIP server, so that
the SIP server can remain
connected to the device.
Default: 30 seconds.
> Setting > Advanced > Account > Video Conference Platform.
Description
Enables the Cloud feature.
Note: if it is set to Off, your
device cannot log into the
Videxio platform.
Select Videxio.
| Configuring Account Settings | 112
Configuration Method
Web user interface
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20