For VP59, tap Setting > Network & Connection > Wireless AP > Configure AP.
•
On your CTP20, tap
Configure AP.
2. Configure and save the following settings:
Parameter
AP Name
Security Mode
Password/AP Password
Network Sharing
Frequency
Channel
> Setting > Network > Host Network > Network > Wireless AP >
Description
Configure the name of
wireless AP.
Configure the security mode
of the wireless AP.
•
None
•
WPA2-PSK
Default: WPA2-PSK.
Configure the password of the
wireless AP.
Note: only when the security
mode is WPA2-PSK do
you need to configure this
parameter.
Enable or disable the system
to share its wired network to
the connected devices.
•
On—The connected
devices can use an
Internet connection.
Off—The connected
•
devices cannot use an
Internet connection.
Default: Disabled.
Configure the frequency of
the wireless AP.
•
2.4G
•
5G
Default: 5G.
Configure the channel of the
wireless AP.
Default: Auto.
| Configuring Network Settings | 71
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20