Setting The Endpoint As Vmr Mode Conference Rooms - Yealink MeetingEye 600 Administrator's Manual

Parameter
Virtual Meeting Room
1Meeting Password
Virtual Meeting Room
1Password

Setting the Endpoint as VMR Mode Conference Rooms

In VMR mode conference, MCU can be used to host two independent conferences, corresponding to
virtual meeting room 1 and virtual meeting room 2. You can configure the password for virtual meeting
room 1 and virtual meeting room 2 to prevent unauthorized participants from joining the virtual conference
room, and allocate the total MCU ways between two virtual meeting rooms at random.
About this task
This feature is only applicable to VC800/VC880/PVT980. For VC880 / PVT980, VMR mode conferences
are not supported when two or more cameras are connected.
• If you import an 8 ways multipoint license to the VC800/VC880/PVT980, X+Y<=8. Virtual meeting room
1 and virtual meeting room 2 support up to 8 ways video calls.
• If you import an 16 ways multipoint license to the VC800/VC880/PVT980, X+Y<=16. Virtual meeting
room 1 and virtual meeting room 2 support up to 16 ways video calls.
• If you import an 24 ways multipoint license to the VC800/VC880/PVT980, X+Y<=24. Virtual meeting
room 1 and virtual meeting room 2 support up to 24 ways video calls.
Description
Enable or disable the system
to configure a password for
virtual meeting room1.
Default: Disabled.
Configure the password for
virtual meeting room 1.
Valid Value: 1 to 10, default
value: 6.
| Configuring Virtual Meeting Room | 204
Configuration Method
Web user interface
Web user interface