Joining The Vmr - Yealink MeetingEye 600 Administrator's Manual

Note: When you import an 8 or 16-way multipoint license to the VC800/VC880/PVT980, virtual
meeting room 1 provides additional 5 voice calls.
Procedure
1. On your web user interface, go to Setting > Built-in MCU Setting > Conference Setting.
2. Select VMR Mode from the Conference Type drop-down menu.
3. Configure and save the following settings:
Parameter
Multipoint Allocation >
Virtual Meeting Room 1
Multipoint AllocationVirtual
Meeting Room 2
Virtual Meeting Room 1 >
Meeting Password
Virtual Meeting Room 1 >
Password
Virtual Meeting Room 2 >
Meeting Password
Virtual Meeting Room
2Password
Note: If you set a password for the virtual conference room, the remote party can not call in
when using other account.

Joining the VMR

If the virtual meeting room requires no password, dial IP address or account to enter the VMR.
Description
Allocates the maximum
ways of video calls for virtual
meeting room 1.
Allocates the maximum
ways of video calls for virtual
meeting room 2.
Enable or disable the system
to configure a password for
virtual meeting room1.
Default: Disabled.
Configure the password for
virtual meeting room 1.
Valid Value: 1 to 10, default
value: 6.
Enable or disable the system
to configure a password for
virtual meeting room 2.
Note: the default value is Off.
Only when the meeting room
type is VMR mode can this
parameter be configured.
Configure the password for
virtual meeting room 2.
Valid Value: 1 to 10, default
value: blank.
Only when the meeting room
type is VMR mode can this
parameter be configured.
| Configuring Virtual Meeting Room | 205
Configuration Method
Web user interface
Web user interface
Web user interface
Web user interface
Web user interface
Web user interface