Yealink MeetingEye 600 Administrator's Manual page 248

Parameter
Control Security Password
Baud Rate
Data Bits
Parity
Description
The authentication password
required when the control
system tries to connect to the
video conferencing system.
Default: blank.
Note: this parameter is
only available for Control
Security Enabled. If you
change this parameter, the
system will reboot to make
the change take effect.
Configure the baud rate.
• 2400
4800
•
9600
•
19200
•
• 38400
• 115200
Note: Default: 115200 It
must be the same rate for the
control system and Yealink
video conferencing system.
Configure the data bits.
• 7
8
•
Note: Default: 8 It must be
the same rate for the control
system and Yealink video
conferencing system.
Configure the parity.
None
•
Odd
•
• Even
• Space
Note: Default: blank. It must
be the same rate for the
control system and Yealink
video conferencing system.
| Configuring the Security Features | 248
Configuration Method
Web user interface
Web user interface
Web user interface
Web user interface