Yealink MeetingEye 600 Administrator's Manual page 114

Parameter
Server Host/Server
Port
Remember password
Transport
Description
The IP address or the domain
name of the server.
Note: the default value is
blank.
Configure the port of the
custom server.
Note: the default value is 0.
The value can be any integer
from 0 to 65535.
Enable or disable
remembering password.
Note: the default value is Off.
If it is set to On, the password
will be filled automatically
when you enter the username
next time.
Specify the transport protocol
for transmitting the SIP
signaling.
The supported protocols are
as follows:
UDP—it provides the
•
best transmission for SIP
signaling.
TCP—it provides a reliable
•
transmission for SIP
signaling.
• TLS—it provides a safe
transmission for SIP
signaling. TLS is available
only when the device is
registered on a SIP server
that supports TLS.
• DNS-NAPTR—the device
performs the DNS NAPTR
and SRV request to find
the service type and the
port if no server port is
given.
Default: TCP.
| Configuring Account Settings | 114
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Endpoint
CTP20
Web user interface