Configuring Network Settings; Configuring Ipv4 Or Ipv6; Configuring Ip Addressing Mode - Yealink MeetingEye 600 Administrator's Manual

Configuring Network Settings

The following introduces how to configure network settings.

Configuring IPv4 or IPv6

•
Setting the Wireless Network
•
Wireless Access Point
•
Configuring DNS Server
•
DHCP Options
•
Configuring LLDP
•
Configuring VLAN Manually
•
Configuring DHCP VLAN
•
802.1x Authentication
•
Enabling/Disabling the PC Port
•
Network Speed and Duplex Mode
•
Restricting Reserved Ports
•
Quality of Service (QoS)
•
Configuring MTU
•
Configuring SNMP
•
Configuring IPv4 or IPv6
Yealink video conferencing system supports IPv4 addressing mode, IPv6 addressing mode, as well as the
IPv4&IPv6 dual stack-addressing mode.
Note:
Yealink video conferencing systems comply with the DHCPv4 specifications documented in
2131, and the DHCPv6 specifications documented in

Configuring IP Addressing Mode

•
Configuring IPv4
•
Configuring IPv6
•
Configuring IP Addressing Mode
Procedure
1. Do one of the following:
On your web user interface, go to Network > LAN Configuration > Internet Port > IPv4/IPv6.
•
• On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Network > Advanced > Wired
Network > IP Mode.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wired Network >
IP Mode.
For VC200, go to More > Network > Wired Network > IP Mode.
For VP59, go to Setting > Advanced > Wired Network > IP Mode.
•
On your CTP20, tap
Mode.
> Setting > Network > Host Network > Network > Wired Network > IP
| Configuring Network Settings | 62
RFC 3315.
RFC