Capturing The Packets Via Remote Control; Capturing The Packets Via Ethernet Software - Yealink MeetingEye 600 Administrator's Manual

Syntax
Direction
Host(s)
Logical Operations
Example: (src host 10.4.1.12 or src net 10.6.0.0/16) and tcp dst port range 200-10000 and dst net
10.0.0.0/8
Packets with source IP address 10.4.1.12 or source network 10.6.0.0/16, the result is then concatenated
with packets having destination TCP port range from 200 to 10000 and destination IP network 10.0.0.0/8.

Capturing the Packets via Remote Control

You can capture packets via your remote control, and store the packets to the USB flash drive. This feature
is not applicable to VP59.
Before you begin
If you want to save packets to the USB flash drive, make sure a USB flash drive is connected, and the USB
feature is enabled.
Procedure
1. On the idle screen or during a call, long press
The monitor prompts "Onekey-capture has been turned on, press the Backspace key for 2s to turn off
it".
2. Long press
on VCR11 or the Mute Key on VCR20 for 5 seconds to stop capturing packets.
The packets are saved in the yealink.debug folder on your USB flash drive.
Related tasks
Configuring USB Storage

Capturing the Packets via Ethernet Software

Connect the Internet ports of your system and your computer to the same HUB, and then use Ethernet
software to capture the signal traffic.
Description
Values: src, dst, src and dst, src or dst
If no source or destination is specified, the "src
or dst" keywords are applied. For example:
"host 10.2.2.2" is equivalent to "src or dst host
10.2.2.2".
Values: net, port, host, portrange
If no host(s) is specified, the "host" keyword is
used. For example: "src 10.1.1.1" is equivalent to
"src host 10.1.1.1".
Values: not, and, or
Negation ("not") has the highest priority.
Alternation ("or") and concatenation ("and") have
equal priority and associate from left to right. For
example, "not tcp port 3128 and tcp port 23" is
equivalent to "(not tcp port 3128) and tcp port
23". "not tcp port 3128 and tcp port 23" is NOT
equivalent to "not (tcp port 3128 and tcp port
23)".
on VCR11 or the Mute Key on VCR20.
| System Maintenance | 264