Configuring The Pstn Account - Yealink MeetingEye 600 Administrator's Manual

Procedure
1. Do one of the following:
• On your web user interface, go to Account > H.323 or Account > VC Platform > Video
Conference Platform > Platform Type > StarLeaf.
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Advanced > Account > H.323.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Advanced > H.323.
For VP59, tap Setting > Advanced > H.323.
•
On your CTP20, tap
2. Configure and save the following settings:
Parameter
H.323 Tunneling

Configuring the PSTN account

PSTN box CPN10 is used to connect video conferencing system to the PSTN (Public Switched Telephone
Network). It is a cost-effective solution for PSTN office. Up to 2 cascaded PSTN Boxes can be installed
to video conferencing systems, which allow you to experience the conference conveniently in excellent
speech quality with PSTN. For more information, refer to
PSTN is connected, you can take the PSTN as one audio and use the PSTN to join the conference mixing
with the audio and video.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > PSTN Account.
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Advanced > Account > PSTN
Account.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Advanced > PSTN
Account.
For VP59, go to Setting > Advanced > PSTN Account.
•
On your CTP20, go to
2. Configure and save the following settings:
Parameter
Account Active/PSTN
Account X
> Setting > Advanced > Account > H.323.
Description
Enable or disable the system
to send all signaling and
media through the HTTP
tunnel.
Default: Disabled.
> Setting > Advanced > Account > PSTN Account.
Description
Enable or disable the PSTN
account X.
Default: On. X=1-2.
Configuration Method
Web user interface
Endpoint
CTP20
Yealink PSTN Box CPN10 Quick Start
Configuration Method
Web user interface
Endpoint
CTP20
| Configuring Account Settings | 98
Guide. After