Parameter
Audio Output/Extended
Audio Output
Note:
The system will start EQ self-adaption to optimize the acoustic effect automatically when the
audio output switches to HDMI or Line Output/USB to Line out.
Related information
EQ Self Adaption
Audio Input
Audio Input Type
•
Specifying an Available Audio Input
•
Description
Specify the audio output for
the system.
The supported types are as
follows:
•
Auto- selects the audio
output device with the
highest priority.
VCS Phone - selects the
•
CP960 conference phone.
(it is not applicable to
VP59)
HDMI - select the built-in
•
speaker of the monitor. If
you connect two monitors
to your system, only the
HDMI 1 port is available
for audio output.
Line Output –the speaker
•
connected to MeetingEye
600/VC880/VC800/
VC200/PVT980 codec.
USB to Line output -
•
the audio output device
connected to the USB port
on the MeetingEye 600/
MeetingEye 400/PVT980/
PVT950/VC500/VC200/
VP59 via a USB to Line
output adapter.
Note: the default value is
Auto. If VCS Phone is set
as the audio output device
manually or automatically, the
audio input device must be
VCS Phone.
| Configuring the Audio Settings | 144
Configuration Method
Web user interface
Endpoint
CTP20